DS430S Combined Chip Forge & Brazing Hearth

The DS430S is a combined Ceramic Chip Forge and Brazing Hearth with fail safe controls. It is based on well proven Flamefast technology and is especially useful where space limitations are a consideration. The unit consists of a ceramic chip forge and a single brazing hearth usually equipped with a Flamefast RF80 brazing torch. The unit can be run on either Natural Gas or LPG bottled gas.

The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach working temperature. It can reach a temperature of 1,500°C. It has a 340mm diameter working area and can work up to 50mm steel bar. The ceramic chip technology minimises surface scale formation.

The brazing hearth has an area of 0.23 square metres with a heavy duty refractory base. The RF80 brazing torch, which delivers up to 80,000BTU of heat output, can be replaced by a Flamefast RF10 jewellery torch for fine work. All Flamefast RF torches have a single hand-wheel control to give ease of flame control and a constant flame pattern over the range of flame sizes. The torches are ignited electronically.

All sequences of operation are visually displayed using neon indicators. On start-up, the gas train, hoses and torches are tested for escaping gas. Leaks from any component will result in a continuously illuminated red neon and the main flow of gas will be prevented from entering the system.

As with all Flamefast equipment, the DS430S Chip Forge/Single Brazing Hearth is covered by the Flamefast unconditional 2 year warranty.

Standard Equipment (Forging):

• Push-button no-volt release starter
• Ceramic hearth
• Automatic safety check of controls and air fan
• Full manual control of hearth conditions
• Whisper quiet air blower fan
• Indicator status lights
• Gas non-return valve
• 12.5kg of ceramic chippings
• Operation/Instruction manual
• Side and rear heat shields
• Rake iron

Standard Equipment (Brazing):

• 1 asbestos-free heat resistant refractory hearth
• 2 full size heat reflective blocks
• 4 half size heat reflective blocks
• Push-button no-volt release starter
• 1 RF80 brazing torch
• Colour coded reinforced gas and air hoses
• Whisper quiet air blower fan
• Push button electronic ignition
• Auto gas leak proving system on start up
• Indicator status lights
• Gas non-return valve
• Operation/Instruction manual

Optional Extras:

• Fume extraction
• RF10 Fine Jewellery brazing torch.
• 300mm revolving brazing table.
• Brazing kit

DS430D Combined Chip Forge & Double Brazing Hearth

The DS430D is a combined Ceramic Chip Forge and Double Brazing Hearth with fail safe controls. It is based on well proven Flamefast technology and is particularly useful where space limitations are
a consideration.

The unit consists of a ceramic chip forge and two brazing hearths usually equipped with two Flamefast RF80 brazing torches. The unit can be run on either Natural Gas or LPG bottled gas. The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach working temperature. It can reach a temperature of 1,500°C. It has a 340mm diameter working area and can work up to 50mm steel bar. The ceramic chip technology minimises surface scale formation.

The brazing hearths both have an area of 0.23 square metres with heavy duty refractory bases. One or both of the RF80 brazing torches, which deliver up to 80,000BTU of heat output, can be replaced by Flamefast RF10 jewellery torches for fine work. All Flamefast RF torches have a single hand-wheel control to give ease of flame control and a constant flame pattern over the range of flame sizes. The torches are ignited electronically.

As with all Flamefast equipment, the DS430D Chip Forge/Double Brazing Hearth is covered by the Flamefast unconditional 2
year warranty.

Standard Equipment (Forging):

• Push-button no-volt release starter
• Ceramic hearth
• Automatic safety check of controls and air fan
• Full manual control of hearth conditions
• Whisper quiet air blower fan
• Indicator status lights
• Gas non-return valve
• 12.5kg of ceramic chippings
• Operation/Instruction manual
• Side and rear heat shields
• Rake iron

Standard Equipment (Brazing):

• 2 asbestos-free heat resistant refractory hearths
• 4 full size Heat Reflective Blocks
• 8 half size Heat Reflective Blocks
• Push-button no-volt release starter
• 2 RF80 brazing torches
• Colour coded reinforced gas and air hoses
• Whisper quiet air blower fan
• Push button electronic ignition
• Auto gas leak proving system on start up
• Indicator status lights
• Gas non-return valve
• Operation/Instruction manual

Optional Extras:

• RF10 Fine Jewellery brazing torch
• 300mm revolving brazing table
• Brazing kit
• Fume extraction