GasGuard™1 - Automatic Gas Proving System

A proven method for gas isolation and detection for use in school laboratories and workshops, commercial catering establishments where compliance with BS 6173 is required, boiler house applications and also gas control in hospitals.

The GasGuard™1 Automatic Gas Proving System provides complete protection from leaks and critical loss of pressure. This unique system provides a full pressure test of all supply pipework and detects all levels of leaks unlike other systems using weep bypass methods.

The GasGuard™1 System is quick and easy to install and does not require a Gas Safe Engineer for commissioning or extra pipe work for weep by-pass venting. The system consists of a wall mounted control panel and a self contained actuator/pressure sensing unit. The actuator unit is easily fitted into the main gas supply and no intervalve pipework is required thus maintaining low installation costs. The interface between the control panel and actuator only requires a five core cable. Gas availability time is factory set at 15 hours. This can be adjusted from 1 to 15 hours (in one hour increments) and also on a continuous setting if timing is not required. This is particularly useful in catering and boiler house applications.

Overview:

• Additional emergency stops can be interfaced
• Fire alarm interface
• BMS interface
• Gas sniffer with built-in time delay, avoids nuisance tripping
• No nuisance tripping with extraction interface built-in time delay
• Can be easily interfaced to a kitchen extraction system

Optional Extras:

• Supplied as either a Master Supervisor Unit or Slave System
• Gas detectors
• Natural Gas sensors
• Remote emergency stops
• Differential pressure switches

Click here to download a full technical specification PDF (31kb)

Having trouble downloading our data sheets? Email sales@flamefast.co.uk

Download Adobe
Reader for FREE